This kit includes 6 components, each built and powder-coated in-house.
Jeep Gladiator JT 20+ 2pc Cruise Series Front Lower Adjustable Control Arms
View Component →
Jeep Gladiator JT 20+ 2pc Cruise Series Front Upper Adjustable Control Arms
View Component →
Jeep Gladiator JT 20+ 2pc Cruise Series Rear Lower Adjustable Control Arms
View Component →
Jeep Gladiator JT 20+ 2pc Cruise Series Rear Upper Adjustable Control Arms
View Component →
Jeep Gladiator JT 20+ Cruise Series Front Heavy-Duty Adjustable Track Bar
View Component →
Jeep Gladiator JT 20+ Cruise Series Rear Heavy-Duty Adjustable Track Bar
View Component →The Ultimate Hard Component Suspension Solution
Upgrade your Jeep Gladiator JT (2020-Present) with the Cruise Series 10-Piece Kit, an all-in-one suspension upgrade designed to eliminate caster deficiencies, driveline vibrations, wandering, rut-following, and even death wobble. By replacing all key hard components, this kit ensures proper alignment, axle centering, and improved ride quality both on and off the road.
Each component is built from heavy-duty steel tubing and features polyurethane bushings, delivering superior strength, adjustability, and long-lasting durability to tackle any terrain.
Key Features and Benefits
- Eliminates driveline vibrations – Adjust rear pinion angle for a smoother ride and reduced wear on driveline components.
- Corrects caster deficiencies – Regains proper caster angle, improving steering precision and eliminating wandering.
- Centers axles properly – Ensures correct front and rear axle positioning, critical for lifted vehicles.
- Designed for 0 to 6 inches of lift – Fully adjustable control arms and track bars allow for precise suspension tuning.
Built for Durability
Heavy-duty steel construction and polyurethane bushings provide long-lasting performance.
Recommended Pairing for Ultimate Performance
Combine with the Cruise Series Front Rear End Link Set (CRS-J-JT-ELS4) to create a complete high-performance suspension system.
Durable Two-Stage Powder Coating
Each component undergoes a zinc primer base coat for corrosion resistance, followed by a top coat available in 10 colors for a personalized look.
Optional Hardware Upgrade
Designed to reuse factory hardware, with optional Grade 8 hardware kits available separately for rusted or worn-out bolts.
Notes: Some, (not all) factory axle mounts need to be "clearanced" to accept our larger bar. If needed, it is only a minor amount of trimming to be done. This applies to the front track bar only. Please see our Youtube channel for a video addressing this.
Vehicle Fitment: Jeep Gladiator JT 20+ – Eliminates common lift-related issues like axle misalignment, wandering, and driveline vibrations for a smoother, more controlled ride.
CORE Advantage: Replaces all critical hard components, restoring proper suspension geometry, caster correction, and steering precision for superior handling.
Adjustability: Designed for 0 to 6 inches of lift, allowing precise tuning of axle centering, pinion angles, and alignment to match your build.
Construction: Heavy-duty steel tubing with polyurethane bushings, ensuring maximum durability, strength, and long-term performance.
Two-Stage Powder Coating: Zinc primer base and top coat available in 10 vibrant colors protect against corrosion and allow for personalized styling of your rig.
Warranty and Origin: Proudly manufactured in the United States, our product includes a lifetime warranty on all non-wear items, providing you with confidence and peace of mind in your purchase.
Built With
Front Lower control arms built with 1.875” OD 3/16” Wall Steel Tubing. Polyurethane Bushings on the fixed and adjustable ends with 1.25” x 12 TPI - 3.25” long threads.
Front Upper control arms built with 1.625” OD 3/16” Wall Steel Tubing. Welded U-bracket on the fixed end and a Polyurethane Bushing on the adjustable end with 1” x 14 TPI - 3.25” long threads.
Rear Upper control arms built with 1.875” DOM 3/16” Wall Steel Tubing. Polyurethane Bushings on both the adjustable end and fixed end with 1.25” x 12 TPI - 3.25” long threads.
Rear Lower control arms built with 1.875” OD 3/16” Wall Steel Tubing. Polyurethane Bushings on the fixed and adjustable ends with 1.25” x 12 TPI - 3.25” long threads.
Front Track Bar built with 1.5” OD 5/16” Wall DOM. Polyurethane Bushing on the fixed end and a Forged Johnny Joints on the adjustable end with 1” x 14 TPI - 2.32” long threads.
Rear Track Bar built with 1.5” OD 5/16” Wall DOM. Polyurethane Bushing on both the adjustable and fixed end with 1” x 14 TPI - 3.25” long threads.
| Make | Model | Submodel | Years |
|---|---|---|---|
| Jeep | Gladiator | 2020 - Present |
Each rebuild kit includes all necessary components to replace and restore wearable parts.
Construction & Materials
Front Lower control arms built with 1.875” OD 3/16” Wall DOM. Polyurethane Bushings on the fixed and adjustable ends with 1.25” x 12 TPI - 3.25” long threads.
Front Upper control arms built with 1.5” OD 5/16” Wall DOM. Welded U-bracket on the fixed end and a Polyurethane Bushing on the adjustable end with 1” x 14 TPI - 3.25” long threads.
Rear Lower control arms built with 1.875” OD 3/16” Wall DOM. Polyurethane Bushings on the fixed and adjustable ends with 1.25” x 12 TPI - 3.25” long threads.
Rear Upper control arms built with 1.875” DOM 3/16” Wall DOM. Polyurethane Bushings on both the adjustable end and fixed end with 1.25” x 12 TPI - 3.25” long threads.
Front Track Bar built with 1.5” OD 5/16” Wall DOM. Polyurethane Bushing on the fixed end and a Forged Johnny Joints on the adjustable end with 1” x 14 TPI - 2.32” long threads.
Rear Track Bar built with 1.5” OD 5/16” Wall DOM. Polyurethane Bushing on both the adjustable and fixed end with 1” x 14 TPI - 3.25” long threads.
| Vehicle | Jeep Gladiator JT (20–Present) |
| Brand | CORE 4X4 |
| Color | Black or Blue or Charcoal or Green or LightGreen or Orange or Purple or Red or White or Yellow or Custom Color - Other than what is listed above. Extra charge varies. We will reach out after order is placed. |
| Series | Cruise Series |
| Lift Size | 0" — 6" or 6"+ |
| Hardware | No Hardware or Complete Kit |
| Rear Track Bar Clearance Bend For Spare Tire | Straight Bar or Clearance Bend |
| Placement on Vehicle | Front Upper, Front Lower, Rear Upper, Rear Lower, Front, Rear |
| Mounting Style | Bolt-On |
Reviews of Core 4x4
Suggested Products
Jeep Gladiator JT 20+ 2pc Cruise Series Front Lower Adjustable Control Arms
$ 288.70
Jeep Gladiator JT 20+ 2pc Cruise Series Front Upper Adjustable Control Arms
$ 251.95
Jeep Gladiator JT 20+ 2pc Cruise Series Rear Lower Adjustable Control Arms
$ 288.70
Jeep Gladiator JT 20+ 2pc Cruise Series Rear Upper Adjustable Control Arms
$ 251.95
Jeep Gladiator JT 20+ Cruise Series Front Heavy-Duty Adjustable Track Bar
$ 278.20
Jeep Gladiator JT 20+ Cruise Series Rear Heavy-Duty Adjustable Track Bar
$ 278.20
Specifications
| Color | Black, Blue, Charcoal, Green, LightGreen, Orange, Purple, Red, White, Yellow, Custom Color - Other than what is listed above. Extra charge varies. We will reach out after order is placed. |
| Lift Size | 0" — 6", 6"+ |
| Hardware | No Hardware, Complete Kit |
| Rear Track Bar Clearance Bend For Spare Tire | Straight Bar, Clearance Bend |
| Vehicle | Jeep Gladiator JT (20–Present) |
| Brand | CORE 4X4 |
| Series | Cruise Series |
| Note to Core4x4: | - |
| Tags | |
|---|---|
| Tags | |
