Made in USA
Orem, Utah
Lifetime Guarantee
Unconditional
10 Colors
In-house powder coat
Fully Adjustable
0-6" of lift
3 X-Series Options
Only Core 4x4
RockJock's High-Mount Steering Stabilizer Shock Relocation Bracket Kit allows you to move your existing steering stabilizer shock above your tie rod, getting it completely out of the way of potential rock damage! This kit is an easy, bolt-on solution to protect your shock and keep you wheeling! An additional usage of this kit is, when upgrading to heavy duty steering, the passenger's side end of your Jeep JL or JT Gladiator's steering stabilizer shock will lose it's mounting location forcing you to relocate the shock entirely! This kit provides a solution to bolting your shock back on after that nice new steering is installed. This bracket kit includes all necessary hardware and will bolt onto JL Wranglers or JT Gladiators that are equipped with factory differential housings. Use of this bracket requires you to relocate the other end of the stabilizer shock as well. The other end can be easily relocated and attached to the tie rod tube using any of our steering stabilizer shock bracket kits that clamp to the tie rod tube. NOTE: for use with a traditional steering stabilizer shock only - not for Ram Assist!
| Make | Model | Submodel | Years |
|---|---|---|---|
| Jeep | Gladiator | 2020 - Present | |
| Jeep | Wrangler | 2018 - Present |
| Vehicle | Jeep Gladiator JT (20–Present) or Jeep Wrangler JL / JLU (18–Present) |
| Brand | RockJock |
Reviews of Core 4x4
5.0
★
★
★
★
★
132 reviews
TD
Tim Davis
Sep 24, 2025
★
★
★
★
★
Customer service is amazing, responds fast and know what they are talking about. Their product looks top of the line.
CL
Cade Leith
Mar 23, 2024
★
★
★
★
★
Have full upper/lower CA set on both front and rear axles on a 96 ZJ. These are the rubber bushing sets not joint sets. I have beat the hell out it in the Nevada desert for 2 years and has been great. I don’t go fast but I do articulate suspension a lot. Super solid and haven’t any issues. Just inspected the entire set recently due to some banging under it. Turns out the banging is lower rear shock bushings. Inspected each CA along the way nothing. Aside from dirt and obviously winter roads and what not still in excellent condition, bushings are solid like the day they were installed. I’ll add that I’m about tapped on a short arm at 4.25(less with settle) so the front CA’s get beat on just from that, still they’re like new. Paint is great condition, this set is red. I would definitely buy again. Another plus for me, Utah isn’t local necessarily, but it’s nice to support businesses closer to me.
TH
Todd Hume
Jan 22, 2026
★
★
★
★
★
Their products are great but the service is even better!! Thanks Korby.
TG
Travis Grimm
Mar 23, 2024
★
★
★
★
★
To start off if you're looking to upgrade your control arms definitely hit this company up. Great product, easy install of the product, with three different tiers everything is priced pretty good, I'm a sticker guy and they sent a sticker for each arm each track bar and also three extra ones so the extra are on the Jeep the advertise them for sure. If you're reading this review I highly recommend you to check their website out.
J
Justin
Mar 24, 2021
★
★
★
★
★
Small business, family owned, made in the USA, lifetime warranty. Purchased Tier 3 control arms and rear track bar for a 2006 Jeep LJ. Simple website and easy to contact over phone and email. I had some technical questions and they were happy to answer them. They allow local pickup and were built to order same week. The order was wrapped and ready when I walked in and even gave a tour of the shop. They abrasive blast all raw materials to achieve a better surface profile for powdercoat to adhere and create a smooth, durable finish. I also noticed several CNC machines and a robotic welder they use for all their parts. A small outfit with a robotic welder? Their concern for quality is obvious and it shows in the parts they make. Very impressed. Happy to do business with these guys.
CM
Craig MacIver
May 27, 2025
★
★
★
★
★
Got the CAMP version of adjustable control arms and track bars for our 03 TJ with a 3” lift and 33x10.5 KO 2’s.
Super beefy bars, great fit and adjustability.
Friendly advice and support from Korby at CORE 4X4. Good follow up as well.
The ride quality is great as well as the handling. I think it all looks pretty good as well.
P
Paul
Mar 24, 2023
★
★
★
★
★
I've been having trouble with the track bar (on my 2nd gen Dodge) since I installed the 3rd gen Synergy adapter bracket and a 3rd gen stock bar.. oddly, they call it a '3rd gen bracket' and the stock 3rd gen bar doesn't quite fit, making contact with the bracket. I had attempted to clearance the bracket but it was still making contact and I could feel it over large bumps.
I reached out to a lot of companies, but Core 4x4 offered to make a custom bar for the application with adjustability and dual Johnny joints. The first pass on it didn't work but they sent me out another passenger side end that made it fit incredibly well.
This was all done solely over email/descriptions/pictures/measurements.
Bar is super high quality and heavy duty, made in the US by a family owned company and carries a lifetime warranty. The customer service was responsive and superb, and the price was a lot less than I expected.
BB
Brayden Brockey
Mar 23, 2024
★
★
★
★
★
Got a set of upper control arms for my xj, really impressed with the quality
OA
Owen Adams
Sep 24, 2025
★
★
★
★
★
These guys are awesome I messed up my address on my order somehow and they were so so helpful Korby was right there every step to a solution very communicative and respectful I will definitely be ordering parts with them in the future!
JH
Joe Hu
Sep 24, 2025
★
★
★
★
★
Amazing! I put all my new control arms and it drives a lot smoother and looks great!!!
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.
Specifications
| Vehicle | Jeep Gladiator JT (20–Present), Jeep Wrangler JL / JLU (18–Present) |
| Brand | RockJock |
