Made in USA
Orem, Utah
Lifetime Guarantee
Unconditional
10 Colors
In-house powder coat
Fully Adjustable
0-6" of lift
3 X-Series Options
Only Core 4x4
What It Fits:
Dodge RAM 1500 (2006-2008) 4WD 8 LUG
Dodge RAM 2500 (2003-2013) 4WD
Dodge RAM 3500 (2003-2010) 4WD
Note: Lower ball joints are knurled (BJ131)
The Special Sauce:
HOUSING
- SAE 1045 Solid Steel Forged Housing: This is unequivocally the best carbon alloy steel for this application.
- Knurled Housings: The preferred design for aftermarket installations.
- CNC Machined Housing: Make our parts and bearings dimensionally perfect, eliminating any die wear issues.
BALL STUDS
- SAE 4140 Hot Forged Chromoly Ball Studs: For the strongest possible metallurgy.
- Induction Heat Treated Ball Studs: Provides a very precise heat treatment to the exact depth and location we want it.
- Polished Ball Studs: Built like an anti-friction bearing with extremely precise tolerances.
- Rolled Threads: Made by pressing the shape of the threads into the ball stud instead of cutting. This strengthens the threads instead of weakening them and allows for easy movement of hardware. This ain't no Ikea furniture!
- Step Threads: Allows for very easy movement of hardware on install and superior holding when torqued (installer choice).
BEARING DESIGN
- UPPER: Carbon Bearing Design: Used mainly in Jeep and Dodge upper ball joints is the solver of all things wobbly. Like all our products.
- LOWER: Military Grade Acetal Bearing: The same bearing material spec'd by the US military for Hummer ball joints. This material is: dimensionally stable (doesn't expand or contract with hot or cold, water or oil absorption), can be polished smooth as steel, is anti-friction, doesn't wear itself out under load like metal on metal, and can take an absolute pounding.
BOOTS
- CR Rubber Boots: The most durable material for undercar applications. Resistant to deterioration from road level ozone, oil/gas/engine fluids and extreme heat or cold.
- Internal Seal Boot: The boot is coined onto the ball joint, for superior sealing against contaminants.
FINISH
- E-Coating: Extremely durable electrochemical finishing process
HARDWARE
- Grade 8 - Class 10.9 Hardware: Superior tensile strength.
- Castle Nut: Industry standard where high vibration loads occur.
LUBRICATION
- Pre Threaded Zerk Housing: If you have ever installed a MOOG Ball Joint without a pre-threaded zerk fitting you will understand what a simple but great feature this is. Another installer fav.
- Greaseable: Because it should be.
- Pre-Greased: Just in case you forget, we have you covered.
- Gull Winged Grease Grooves: Allows for improved lubrication disbursement around the ball stud.
- Zerk Fittings: Included for every application.
SPECIAL FEATURES
- LOWER: Custom Features: Side angle Zerk housing with extended Zerk fitting for easier maintenance.
Where It Fits:
Vehicle Position: Front Upper, Front Lower
Quantity per Vehicle: 1
Moog Interchange: K7460 & K7467
XRF Interchange: K7460X & K7467
| Make | Model | Submodel | Years |
|---|---|---|---|
| Dodge/Ram | 2500 | 1994 - 1999 | |
| Dodge/Ram | 3500 | 1994 - 1999 |
| Brand | Apex Chassis |
| Year Range | 03-07 or 08-09 or 10-13 |
Reviews of Core 4x4
5.0
★
★
★
★
★
132 reviews
P
Paul
Mar 24, 2023
★
★
★
★
★
I've been having trouble with the track bar (on my 2nd gen Dodge) since I installed the 3rd gen Synergy adapter bracket and a 3rd gen stock bar.. oddly, they call it a '3rd gen bracket' and the stock 3rd gen bar doesn't quite fit, making contact with the bracket. I had attempted to clearance the bracket but it was still making contact and I could feel it over large bumps.
I reached out to a lot of companies, but Core 4x4 offered to make a custom bar for the application with adjustability and dual Johnny joints. The first pass on it didn't work but they sent me out another passenger side end that made it fit incredibly well.
This was all done solely over email/descriptions/pictures/measurements.
Bar is super high quality and heavy duty, made in the US by a family owned company and carries a lifetime warranty. The customer service was responsive and superb, and the price was a lot less than I expected.
MM
Mike Martinez
Aug 25, 2025
★
★
★
★
★
Phenomenal company - very rare to come by in the automotive industry. Also very impressing. Let me start here. I got a set of yellow sway bar end links for my 19 ram DT (new body style) and let me tell you, I’m hooked. For numerous reasons. One the craftsmanship behind the product is unmatched for sure for without breaking the bank. 2ndly, they stand behind their product. Had a very minor issue and it was resolved in a blink of an eye!!! Insane. Just because of what i listed above i will forever spend my money with core 4x4! And i think you should too! I have no affiliation at all with this company besides being a consumer. I will be ordering my yellow UCAs and the rest of my rear suspension from them here shortly!
Korby on the other hand. The representative that helped me went above and beyond FAST. I hung up the phone with him, and with in no lie 3 minutes he was calling back with an answer. GREAT GREAT GREAT customer service, Korby you and core 4x4 are what give us hope in the car community! With much love and great health to you all!!
C
caleb
Mar 24, 2022
★
★
★
★
★
Absolutely a great company. Ordered rear lower control arms with hardware but when i got it the hardware wasn't there but they sent it out right away and got a free t-shirt! Highly recommend.
J
Justin
Mar 24, 2021
★
★
★
★
★
Small business, family owned, made in the USA, lifetime warranty. Purchased Tier 3 control arms and rear track bar for a 2006 Jeep LJ. Simple website and easy to contact over phone and email. I had some technical questions and they were happy to answer them. They allow local pickup and were built to order same week. The order was wrapped and ready when I walked in and even gave a tour of the shop. They abrasive blast all raw materials to achieve a better surface profile for powdercoat to adhere and create a smooth, durable finish. I also noticed several CNC machines and a robotic welder they use for all their parts. A small outfit with a robotic welder? Their concern for quality is obvious and it shows in the parts they make. Very impressed. Happy to do business with these guys.
DN
Devan Nelson
Mar 25, 2019
★
★
★
★
★
Had a great experience with Core 4x4, I desperately needed a custom track bar and found out just a couple days before Easter Jeep Safari. Spence was a huge help and made it happen with plenty of time to spare. Their parts are top notch!
ST
Sal Torres
May 27, 2025
★
★
★
★
★
upper control arms look great and went on easy.. only reason I gave 4 stars and not 5 is because of a shipping issue which put my build a week behind. The issue was resolved quickly and painlessly, great customer service. Only time will tell how control arms perform but they look great and like they will go above and beyond control arm demand.
LS
Leonard Smith
Jan 22, 2026
★
★
★
★
★
I don’t write reviews often, but Core 4x4 absolutely earned this one.
I recently ordered leaf spring mounts and realized after the fact that I messed up my order. Totally my mistake. Instead of giving me the runaround or pointing at a return policy, Core 4x4 emailed me back and forth, worked through exactly what I was doing with my build, and made sure I ended up with the correct parts.
That kind of customer service is rare these days — especially in the off-road world where a lot of companies stop caring once the order is placed.
The parts themselves are exactly what you hope for: solid, well-made, confidence-inspiring hardware that looks like it belongs under a vehicle that actually gets used. You can tell these are designed by people who understand suspension geometry and real-world abuse, not just CAD screenshots.
Mistakes happen — especially on custom or modified builds — and Core 4x4 handled mine like pros. Fast responses, clear communication, and a genuine effort to help me get it right.
If you’re on the fence: don’t be. Core 4x4 is the kind of company you want backing your build — the kind that treats customers like fellow enthusiasts, not order numbers.
RG
Robert Van Gorder
Apr 27, 2025
★
★
★
★
★
Amazing service. Bought a track bar through Americantrucks.com and they sent it with the wrong size bushing sleeve. Korby at Core 4x4 was quick to get me the correct size and very responsive. Will definitely be using more of their stuff.
C
Chris
Oct 24, 2025
★
★
★
★
★
Great product for a good price. Customer service is top notch, I had an issue which was self cause and Core 4x4 helped me out even though it was my own fault. Would definitely recommend and use them again.
RR
Ryan Rogers
Aug 25, 2025
★
★
★
★
★
I purchased a set of the Cruiser Series control arms for my Jeep Jk based on postive reviews from different Jeep Facebook pages. Ordered and 2 days later realized they had the very same exact arms on sale in the overstock section. Called them up and they refunded me the savings from my original purchase. Amazing, honest service. Can't wait to get them installed. Keep up the good work guys.
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.
Specifications
| Year Range | 03-07, 08-09, 10-13 |
| Brand | Apex Chassis |
