Made in USA
Orem, Utah
Lifetime Guarantee
Unconditional
10 Colors
In-house powder coat
Fully Adjustable
0-6" of lift
3 X-Series Options
Only Core 4x4
Essential Protection for Your Lifted Jeep
Upgrading your 2020-Present Jeep Gladiator JT with increased suspension flex and lift? Ensure your rig is protected from over-compression damage with CORE 4X4 Front Bump Stop Extensions (J-JT-F-BSK). Factory bump stops become inadequate as lift height increases, leading to tire-to-fender contact, frame stress, and potential component damage. These precision-machined extensions restore proper bump stop engagement, preventing costly issues while maintaining optimal suspension travel.
Key Features and Benefits
- Prevents Over-compression Protects Components – Properly limits suspension travel to prevent tire contact, fender damage, and excessive stress on suspension components.
- Lightweight, High-Strength Aluminum Construction – Machined from 6061 T6 Aluminum, providing exceptional strength without unnecessary weight. Corrosion-resistant and highly durable, ensuring long-lasting protection in extreme conditions.
- Straightforward Installation – Simple bolt-on process, utilizing existing factory mounting locations for a seamless fit. Includes all necessary hardware for an easy and secure installation.
Precision Fit for Any Suspension Setup
Available in multiple sizes to accommodate various lift heights and suspension setups, ensuring proper bump stop engagement without sacrificing performance.
Two-Stage Powder Coating for Maximum Durability
Each component undergoes a zinc primer base coat for corrosion resistance, followed by a top coat available in 10 colors, allowing you to customize your Jeep while protecting against rust and wear.
Proudly Made in the USA
Manufactured at our Orem, UT facility, we maintain strict quality control and support local suppliers, ensuring rugged durability and premium craftsmanship.
| Make | Model | Submodel | Years |
|---|---|---|---|
| Jeep | Gladiator | 2020 - Present |
Construction & Materials
Front Bump Stops machined from 2.5” 7075 Aluminum.
| Vehicle | Jeep Gladiator JT (20–Present) |
| Brand | CORE 4X4 |
| Color | Black or Blue or Charcoal or Green or Light Green or Orange or Purple or Red or White or Yellow or Raw Aluminum or Custom Color - Other than what is listed above. Extra charge varies. We will reach out after order is placed. |
| Bump Stops | None or New Bump Stop Rubber Pads (Available For Front Only - Not Pictured) |
| Height | 2" or 3" or 4" |
| Placement on Vehicle | Front |
| Mounting Style | Bolt-On |
Use the vehicle selector on our website to shop by your year, make, and model. On product pages, use the kit builder to select your color, series, lift height, and any add-on options, then add to cart. If you need help, call or email our team.
Standard orders typically ship within 1–3 business days of ordering. Custom color orders take approximately 5–10 business days. Because everything is built in-house, we can turn orders quickly even for custom specifications.
You can reach our team through the contact form on our website, or browse to the Contact Us page. Our team is available to answer pre-sale and technical questions before and after your purchase.
Reviews of Core 4x4
5.0
★
★
★
★
★
132 reviews
P
Paul
Mar 24, 2023
★
★
★
★
★
I've been having trouble with the track bar (on my 2nd gen Dodge) since I installed the 3rd gen Synergy adapter bracket and a 3rd gen stock bar.. oddly, they call it a '3rd gen bracket' and the stock 3rd gen bar doesn't quite fit, making contact with the bracket. I had attempted to clearance the bracket but it was still making contact and I could feel it over large bumps.
I reached out to a lot of companies, but Core 4x4 offered to make a custom bar for the application with adjustability and dual Johnny joints. The first pass on it didn't work but they sent me out another passenger side end that made it fit incredibly well.
This was all done solely over email/descriptions/pictures/measurements.
Bar is super high quality and heavy duty, made in the US by a family owned company and carries a lifetime warranty. The customer service was responsive and superb, and the price was a lot less than I expected.
MH
mark hinz
Mar 2, 2026
★
★
★
★
★
Went above and beyond to get the parts we needed to complete our customers build for Moab Easter safari cant thank you enough for all your hard work and efforts
Thank you and look forward to working with you in the near future
OJ
Oldgreg jr
Mar 23, 2025
★
★
★
★
★
Good company, they offer well built parts and Great customer service.
I had a couple of hang ups with my control arms that I purchased, they were very easy to work with and found the solution to make them work.
AM
Adam M
Sep 24, 2025
★
★
★
★
★
First time buying from Korby @ Core 4x4 and it’s being nothing short of a great experience. I bought the non adjustable Trail kit for my 5th Gen Ram 1500 with a 2” lift. The welds look great, nice powder coat finish and quality bushing. Had some trouble fitting the grease nipples due to the powder coating but a thread tap would fix that. They fit easily and perform great. I felt the improvement straight away. No more wheel hop on hard acceleration which was my main reason for the purchase.
I was missing some smaller bushings needed for the 5th Gen and Korby’s custom service was on point, with responsive emails and mailing out the missing parts straight away. Very happy with their products and customer service. Highly recommended company👌🏽
MH
Matthew Handy
Sep 24, 2025
★
★
★
★
★
Ran into an issue with a part that I ordered. Got ahold of them explained to them the issue I was having and they jumped in and got the issue fixed. Hands down the best customer service I have ever dealt with. The parts are hands down amazing. Highly recommend.
CL
Cade Leith
Mar 23, 2024
★
★
★
★
★
Have full upper/lower CA set on both front and rear axles on a 96 ZJ. These are the rubber bushing sets not joint sets. I have beat the hell out it in the Nevada desert for 2 years and has been great. I don’t go fast but I do articulate suspension a lot. Super solid and haven’t any issues. Just inspected the entire set recently due to some banging under it. Turns out the banging is lower rear shock bushings. Inspected each CA along the way nothing. Aside from dirt and obviously winter roads and what not still in excellent condition, bushings are solid like the day they were installed. I’ll add that I’m about tapped on a short arm at 4.25(less with settle) so the front CA’s get beat on just from that, still they’re like new. Paint is great condition, this set is red. I would definitely buy again. Another plus for me, Utah isn’t local necessarily, but it’s nice to support businesses closer to me.
8
89Patriot
Jan 22, 2026
★
★
★
★
★
Great company! I have used there products consistently with no complaints with quality you can see and feel. From my experience, their customer service is also amazing. Core 4x4 has no issues standing behind their already amazing products and will quickly and professionally solve issues may they arise. I will continue to be a customer.
MM
Mike Martinez
Aug 25, 2025
★
★
★
★
★
Phenomenal company - very rare to come by in the automotive industry. Also very impressing. Let me start here. I got a set of yellow sway bar end links for my 19 ram DT (new body style) and let me tell you, I’m hooked. For numerous reasons. One the craftsmanship behind the product is unmatched for sure for without breaking the bank. 2ndly, they stand behind their product. Had a very minor issue and it was resolved in a blink of an eye!!! Insane. Just because of what i listed above i will forever spend my money with core 4x4! And i think you should too! I have no affiliation at all with this company besides being a consumer. I will be ordering my yellow UCAs and the rest of my rear suspension from them here shortly!
Korby on the other hand. The representative that helped me went above and beyond FAST. I hung up the phone with him, and with in no lie 3 minutes he was calling back with an answer. GREAT GREAT GREAT customer service, Korby you and core 4x4 are what give us hope in the car community! With much love and great health to you all!!
S
Sebastian
Oct 24, 2025
★
★
★
★
★
Great products they sell, got a crawl series long arm kit for my xj and it has held up quite nice, they are beefy, and for what ever reason they fail it has a great warranty with a customer service to match, when someone asks what control arm kit to buy I always recommend core 4x4
NM
Noah Myers
Mar 23, 2024
★
★
★
★
★
I contacted these guys on a Saturday through email and needed some control arms by the following weekend, Spence got back with me and told me he would make sure the order got shipped out on Monday, they got busy and wasn’t able to ship the package out so he got back with me that evening and upgraded my shipping for free and shipped out the next day, only because he told me he’d make sure I’d have them by the weekend! This company sticks to their word! The customer service from these guys are unmatched and they will have another lifetime customer here!
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.
Specifications
| Color | Black, Blue, Charcoal, Green, Light Green, Orange, Purple, Red, White, Yellow, Raw Aluminum, Custom Color - Other than what is listed above. Extra charge varies. We will reach out after order is placed. |
| Bump Stops | None, New Bump Stop Rubber Pads (Available For Front Only - Not Pictured) |
| Height | 2", 3", 4" |
| Vehicle | Jeep Gladiator JT (20–Present) |
| Brand | CORE 4X4 |
| Note to Core4x4: | - |
| Tags | |
|---|---|
| Tags | |
