The Ultimate Front-End Upgrade for Your Dodge Ram
Transform your 2008-Present Dodge Ram 5500 with our Adjustable Front Track Bar, engineered for maximum stability, precise alignment, and enhanced steering control. Factory track bars wear out, flex under load, and contribute to axle shift, steering instability, and even death wobble. Our track bar is built from heavy-duty 1.5" OD cold-rolled steel and features a chromoly adjuster sleeve, allowing on-vehicle fine-tuning for perfect axle alignment across 0-6 inches of lift. Whether you're towing, hauling, or tackling rugged terrain, this track bar ensures your axle stays centered, your steering stays sharp, and your suspension stays rock-solid.
Key Features and Benefits
- On-Vehicle Adjustability Secure Locking – Fine-tune axle alignment without removal. The chromoly adjuster sleeve, clamp, and jam nut system lock settings securely for long-term stability.
- Engineered to Reduce Death Wobble – Helps recenter the axle and stabilize the front end, reducing excessive vibration and steering play. Pair with our Tow Front Set of Control Arms (TOW-D-55-2008-FS4) for caster correction and a complete solution.
- Heavy-Duty Cold-Rolled Steel Build – 1.5" OD cold-rolled steel construction ensures superior strength and rigidity, minimizing flex under heavy loads and improving front-end control.
- Replaceable FK Bearings on both ends of the bar provide the most solid connection possible for the most reliable daily driver, tow rig, or off road beast.
- Compatible with 0-6 Inches of Lift – Fully adjustable to recenter the axle and improve handling, ensuring proper suspension geometry and preventing premature wear.
A Critical Component in Reducing Death Wobble
Death wobble is often caused by axle misalignment, worn suspension components, and loose steering geometry. While no single part eliminates death wobble, a properly adjusted track bar is one of the most crucial upgrades. By keeping the axle centered and reducing excessive movement, it enhances steering response, stability, and front-end control. Pairing it with our Tow Front Set of Control Arms (TOW-D-55-2008-FS4) corrects caster angle, further improving front-end stability and tracking.
Two-Stage Powder Coating for Maximum Durability
Every track bar undergoes a zinc primer base coat for corrosion resistance, followed by a top coat available in 10 colors, ensuring long-term protection and customization.
Made in the USA
Proudly manufactured in Orem, UT, with strict quality control for unmatched strength, reliability, and longevity.
Optional Hardware Upgrade
Easily installs using factory hardware, with Grade 8 hardware kits available separately for trucks with rusted bolts.
Vehicle Fitment: Dodge Ram 5500 08+ – Designed to optimize axle alignment, improve handling, and reduce death wobble for a more stable and responsive driving experience, whether for towing, hauling, or off-road use.
CORE Advantage: Ensures precise axle alignment, reduces death wobble, and improves steering stability by recentering the axle. The adjuster sleeve and locking system allow for worry-free adjustments, locking the alignment securely in place for long-term stability.
Adjustability: Fully adjustable while installed, allowing on-vehicle fine-tuning for 0 to 6 inches of lift. The system allows easy axle realignment without removal, providing consistent, reliable adjustments without concern for misalignment.
Construction: Built from heavy-duty 1.5” OD cold-rolled steel with a chromoly adjuster sleeve, replaceable FK Bearings, and a durable two-stage powder coating process for maximum strength and a rock-solid connection.
Two-Stage Powder Coating: Zinc primer base and top coat available in 10 vibrant colors protect against corrosion and allow for personalized styling of your rig.
Warranty and Origin: Proudly manufactured in the United States, our product includes a lifetime warranty on all non-wear items, providing you with confidence and peace of mind in your purchase.
Built With
Front Track Bar built with 1.5” Solid Cold Rolled Steel. Replaceable FK Bearings on both ends of the track bar with a Chromoly turnbuckle.
| Make | Model | Submodel | Years |
|---|---|---|---|
| Ram | 5500 | 2008 - Present |
Each rebuild kit includes all necessary components to replace and restore wearable parts.
Construction & Materials
Front Track Bar built with 1.5” Solid Cold Rolled Steel. Replaceable FK Bearings on both ends of the track bar with a Chromoly turnbuckle.
| Vehicle | Ram HD 5500 (08–Present) |
| Brand | CORE 4X4 |
| Color | Black or Blue or Charcoal or Green or Light Green or Orange or Purple or Red or White or Yellow or Custom Color - Other than what is listed above. Extra charge varies. We will reach out after order is placed. |
| Hardware | No Hardware or Complete Kit |
| Year Range | 08+ |
| Placement on Vehicle | Front |
| Mounting Style | Bolt-On |
Use the vehicle selector on our website to shop by your year, make, and model. On product pages, use the kit builder to select your color, series, lift height, and any add-on options, then add to cart. If you need help, call or email our team.
Standard orders typically ship within 1–3 business days of ordering. Custom color orders take approximately 5–10 business days. Because everything is built in-house, we can turn orders quickly even for custom specifications.
You can reach our team through the contact form on our website, or browse to the Contact Us page. Our team is available to answer pre-sale and technical questions before and after your purchase.
Reviews of Core 4x4
Specifications
| Color | Black, Blue, Charcoal, Green, Light Green, Orange, Purple, Red, White, Yellow, Custom Color - Other than what is listed above. Extra charge varies. We will reach out after order is placed. |
| Hardware | No Hardware, Complete Kit |
| Vehicle | Ram HD 5500 (08–Present) |
| Brand | CORE 4X4 |
| Year Range | 08+ |
| Note to Core4x4: | - |
| Tags | |
|---|---|
| Tags | |
