The Ultimate Solution to Death Wobble
If you’re dealing with death wobble, unpredictable steering instability, or a wandering front end, your Jeep Gladiator’s front track bar is a crucial component to address these issues. Death wobble is caused by loose or worn suspension components, improper alignment, or an off-center axle—all of which can lead to violent steering oscillations at high speeds.
The Cruise Series Front Track Bar keeps your front axle centered and secure, reducing suspension flex and restoring steering precision. For the best defense against death wobble, we recommend pairing this track bar with our Cruise Series Front Lower Control Arms (CRS-J-JT-FL2) to correct caster angle deficiencies, further stabilizing your front suspension and improving high-speed handling.
Key Features and Benefits
- Eliminates Death Wobble – Keeps the axle securely centered, reducing loose steering and instability.
- Increases Stability and Handling – Reduces body roll and front-end wander, especially after lifting your Jeep.
- Adjustable for Lifts (0-6”) – Allows you to recenter the axle and correct suspension geometry for lifted vehicles.
- Durable Polyurethane Bushings – Provides smoother articulation, absorbing vibrations while maintaining stability.
- Heavy-Duty DOM Steel Construction – Built from 1.5” OD .313 wall DOM tubing for maximum strength and longevity.
- Recommended Pairing for Full Death Wobble Prevention – Combine with Cruise Series Front Lower Control Arms (CRS-J-JT-FL2) to correct caster angle and further eliminate steering instability.
Two-Stage Powder Coating for Maximum Protection
Every track bar undergoes a two-stage powder coating process to ensure long-term durability and corrosion resistance: Zinc Primer Base Coat – Forms a rust-resistant barrier for extreme conditions. Customizable Top Coat – Available in 10 colors to match your Gladiator’s build while adding extra protection.
Made in the USA
Proudly designed, tested, and manufactured in Orem, UT, our Cruise Series Front Track Bar meets the highest American craftsmanship and quality control standards.
Optional Hardware Upgrade
Our Front Track Bar installs using factory hardware. However, if your vehicle has rusted, seized, or worn-out bolts, we offer optional Grade 8 hardware kits for a secure and hassle-free installation.
For the most complete death wobble prevention, pair this track bar with our Cruise Series Front Lower Control Arms (CRS-J-JT-FL2) to correct caster angle and further enhance steering stability. Upgrade today and take control of your Jeep’s steering performance!
Notes: Some (not all) factory axle mounts need to be "clearanced" to accept our larger bar. If needed, it is only a minor amount of trimming to be done. Please see our Youtube channel for a video addressing this.
Vehicle Fitment: Jeep Gladiator JT 20+ – Eliminates front-end wandering and unstable steering by keeping the axle properly centered.
CORE Advantage: Reduces death wobble by maintaining correct suspension geometry, minimizing excessive movement that leads to violent steering oscillations.
Adjustability: Designed for lifts from 0 to 6 inches, allowing precise axle alignment corrections to optimize handling and stability.
Construction: Heavy-duty 1.5” OD .313-wall DOM steel tubing with durable polyurethane bushings for strength, vibration absorption, and longevity.
Two-Stage Powder Coating: Zinc primer base and top coat available in 10 vibrant colors protect against corrosion and allow for personalized styling of your rig.
Warranty and Origin: Proudly manufactured in the United States, our product includes a lifetime warranty on all non-wear items, providing you with confidence and peace of mind in your purchase.
Built With
Front Track Bar built with 1.5” OD 5/16” Wall DOM. Polyurethane Bushing on the fixed end and a Forged Johnny Joints on the adjustable end with 1” x 14 TPI - 2.32” long threads.
| Make | Model | Submodel | Years |
|---|---|---|---|
| Jeep | Gladiator | 2020 - Present |
Each rebuild kit includes all necessary components to replace and restore wearable parts.
Construction & Materials
Front Track Bar built with 1.5” OD 5/16” Wall DOM. Polyurethane Bushing on the fixed end and a Forged Johnny Joints on the adjustable end with 1” x 14 TPI - 2.32” long threads.
| Vehicle | Jeep Gladiator JT (20–Present) |
| Brand | CORE 4X4 |
| Color | Black or Blue or Charcoal or Green or LightGreen or Orange or Purple or Red or White or Yellow or Custom Color - Other than what is listed above. Extra charge varies. We will reach out after order is placed. |
| Hardware | No Hardware or Complete Kit |
| Series | Cruise Series |
| Placement on Vehicle | Front |
| Mounting Style | Bolt-On |
Use the vehicle selector on our website to shop by your year, make, and model. On product pages, use the kit builder to select your color, series, lift height, and any add-on options, then add to cart. If you need help, call or email our team.
Standard orders typically ship within 1–3 business days of ordering. Custom color orders take approximately 5–10 business days. Because everything is built in-house, we can turn orders quickly even for custom specifications.
You can reach our team through the contact form on our website, or browse to the Contact Us page. Our team is available to answer pre-sale and technical questions before and after your purchase.
Reviews of Core 4x4
Specifications
| Color | Black, Blue, Charcoal, Green, LightGreen, Orange, Purple, Red, White, Yellow, Custom Color - Other than what is listed above. Extra charge varies. We will reach out after order is placed. |
| Hardware | No Hardware, Complete Kit |
| Vehicle | Jeep Gladiator JT (20–Present) |
| Brand | CORE 4X4 |
| Series | Cruise Series |
| Note to Core4x4: | - |
| Tags | |
|---|---|
| Tags | |
