Made in USA
Orem, Utah
Lifetime Guarantee
Unconditional
10 Colors
In-house powder coat
Fully Adjustable
0-6" of lift
3 X-Series Options
Only Core 4x4
Details
Core 4x4's Crawl Series 4-piece rear control arm set replaces all four worn factory stamped-steel arms on the Cadillac Escalade (2002–2006). The factory arms use soft rubber bushings and a fixed length, so there's no way to re-align the rear axle or correct pinion angle after a lift or leveling kit. These Core 4x4 arms are a serious step up: DOM steel tubing and Rock Jock Johnny Joints at both ends of every arm for maximum articulation, with adjustable length to set rear axle alignment and pinion angle back to spec.
Includes: Rear upper control arms (pair) and rear lower control arms (pair); mounting hardware (bolts, nuts, and washers).
Specs:
- Upper arms — 1.5 in. o.d. × 5/16 in. wall DOM steel
- Lower arms — 1.75 in. o.d. × 5/16 in. wall DOM steel
- Joints — Rock Jock Johnny Joints, both ends (every arm)
- Adjustable length — for rear-axle alignment and pinion-angle correction
- Lift range — 0–6 in. and up
- Made in the USA
- Lifetime warranty — bend it or break it, we'll replace it
- Wear items (bushings, joints) — covered for 18 months
Suspension Type — Factory Autoride (Z55): Chances are, your truck came with rear Autoride (Z55) from the factory — GM's air-leveling system. This part is built to match: the ride-height sensor mounting tab is included on both rear upper arms, so your factory sensors bolt right back on. Converted to coil springs — or never had air ride at all? No problem — everything fits and works exactly the same; the sensor tabs just go unused.
Notes:
- Hardware is included with your arms. If you ever need replacements down the road, the matching kit is available separately.
- Running a lift? The 5-piece rear kit (CRL-G-800-ESC-RK5-Z55) adds the adjustable track bar to recenter the axle side-to-side.
Parts:
- Upper forged Rock Jock Johnny Joint, right-hand — CE-9112N-22 (1 per upper arm, 2 for the upper pair).
- Upper forged Rock Jock Johnny Joint, left-hand — CE-9112NL-22 (1 per upper arm, 2 for the upper pair).
- Lower forged Rock Jock Johnny Joint, right-hand — CE-9114 (1 per lower arm, 2 for the lower pair).
- Lower forged Rock Jock Johnny Joint, left-hand — CE-9114L (1 per lower arm, 2 for the lower pair).
- Replacement hardware kit — CRL-G-800-RS4-HWK.
Fits:
- Chevy Tahoe (2000–2006)
- Chevy Suburban 1500 (2000–2006)
- Chevy Avalanche 1500 (2002–2006)
- GMC Yukon / Yukon XL 1500 (2000–2006)
- GMC Yukon Denali / XL Denali (2001–2006)
- Cadillac Escalade / ESV / EXT (2002–2006)
- 1500-series only. Does NOT fit 2500-series HD.
Built With
See individual component specifications
| Make | Model | Submodel | Years |
|---|---|---|---|
| Cadillac | Escalade | 2002 - 2006 |
Construction & Materials
See individual component specifications
| Brand | CORE 4X4 |
| Color | Black or Blue or Charcoal or Green or Light Green or Orange or Purple or Red or White or Yellow |
| Lift Size | 0" — 6" or 6"+ |
| Series | Crawl Series |
Use the vehicle selector on our website to shop by your year, make, and model. On product pages, use the kit builder to select your color, series, lift height, and any add-on options, then add to cart. If you need help, call or email our team.
Standard orders typically ship within 1–3 business days of ordering. Custom color orders take approximately 5–10 business days. Because everything is built in-house, we can turn orders quickly even for custom specifications.
You can reach our team through the contact form on our website, or browse to the Contact Us page. Our team is available to answer pre-sale and technical questions before and after your purchase.
Reviews of Core 4x4
5.0
★
★
★
★
★
132 reviews
P
Paul
Mar 24, 2023
★
★
★
★
★
I've been having trouble with the track bar (on my 2nd gen Dodge) since I installed the 3rd gen Synergy adapter bracket and a 3rd gen stock bar.. oddly, they call it a '3rd gen bracket' and the stock 3rd gen bar doesn't quite fit, making contact with the bracket. I had attempted to clearance the bracket but it was still making contact and I could feel it over large bumps.
I reached out to a lot of companies, but Core 4x4 offered to make a custom bar for the application with adjustability and dual Johnny joints. The first pass on it didn't work but they sent me out another passenger side end that made it fit incredibly well.
This was all done solely over email/descriptions/pictures/measurements.
Bar is super high quality and heavy duty, made in the US by a family owned company and carries a lifetime warranty. The customer service was responsive and superb, and the price was a lot less than I expected.
AL
Andrew LaFave
May 27, 2025
★
★
★
★
★
I am really please with this company. Great product, i had an issue with a couple of the jonnhy joint bushings, they explained what had caused it and how to fix it. Within hrs of receiving my inquiry, i had heard back with the required info I needed. A couple hrs later problem was fixed and ready for the trail again. They care about heir product and their customers. Thanks crew, you rock
A
Aaron
Mar 23, 2024
★
★
★
★
★
I have recently come to know Core 4x4 when I purchased a Jeep XJ and was looking for a place that had dedicated XJ suspension and components. Here is what makes them different than most other shops. All of their components are top shelf quality and they back it up if you break any of it. I was able to see their shop when I picked up an order locally and was impressed with their attention to detail and how they assemble and powder coat each part. I had an issue with a shackle and needed the threaded shaft to be shorter. I called in and talked to Kaden and he told me to come by and they would shorten it for me. When I got there, Kaden and Spencer (the owner) met me and talked about options and proceeded to make the right adjustments to fit my XJ. Told me if anything changes in the future and I need additional length, they would take care of me. So what really sets them apart from others is their Customer Service. Try calling in to any other Jeep suspension or part shop and see how they treat you. Been there - done that.
Will continue to do business with Core and their team. Getting that kind of service for just a shackle has me thinking I may need to replace my JT components with Core's. Thanks Guys for being helpful good humans!
AP
Ajay Paynter
Mar 9, 2026
★
★
★
★
★
Great company, who worked with me on shipping parts, to arrive in time for a show, when I explained my concern of possibly not getting the control arms in time. Quality is amazing on the part, affordable price for what you get, and the powdercoat is top notch, not a single issue with this product, would buy again.
DR
David Rogers
Aug 25, 2025
★
★
★
★
★
Ive had the front adjustable control arm kit in bright green for my 1996 ZJ.
Ive had the kit for about a year now and i have to say, im extremely impressed, over 1000 miles off-road and roughly 20,000 miles on the highway. These control arm kits for any vehicle built by core 4x4 are well worth the money, just be aware thereight be some minor scatches or chips from shipping ( but who should care about that if you're beating the crap out of em' they way they were built and designed for)
JT
jacob trice
Apr 27, 2025
★
★
★
★
★
Core 4x4 has outstanding products at a fair price and unmatched customer service. When you call Korby, it's like talking with a friend. Very cool and helpul!
I ordered some custom control arms, but from the wrong product line and they were super cool about returning them and upgrading to a better "Crawl" series. Only charged the difference between the two products. They paid all the return shipping and sent the uprgaded arms super quick. It was only a couple days. Awesome!!
I couldn't be happier with the transaction👍🏼
Also, these control arms are stout and take a beating. I run heck out my Jeep in the rocks and desert. No problems whatsoever.
Thanks Core 4x4, ya'll are welcome at my campfire anytime!
Jake T.
Pleasant Hill, Or.
MG
Morgan Griffith
Mar 25, 2018
★
★
★
★
★
I met a couple of the Core 4x4 guys at the Salt Lake Offroad Expo and decided to try them out after noticing one of my control arm bushings was disintegrated. I called to discuss parts on Thursday and I was leaving for a trip on Saturday. These guys built my control arms and had them ready to be picked up Friday, 24 hours later. The parts seem to be great quality and they charged me nothing extra to have them painted. These guys were extremely helpful and without them my trip probably would have been cancelled. looking forward to testing out the arms on my next trip to Moab.
JG
James Griffin
Jul 26, 2025
★
★
★
★
★
Customer service is top notch. They answered all of my questions and got me my tracking number for my packages. I just received both of them and the quality is next level. You guys are truly awesome.
MS
Mr. Smith
Nov 23, 2025
★
★
★
★
★
Have yet to get to try them but I bought some upper, and then later , lower control arms for my 03 rubicon. The pricing is very fair, so fair I was hesitant to even purchase. When the product came in I was happily mistaken. These are some beefy units with an incredible warranty! I’m very excited! I went with the “Camp”series as I mostly daily it.
I have trouble with the shipping at times when I ordered but Corby is quick to notice things and help communicate the solution. Looking forward to buying more parts!
RC
Ryan Colligan
Mar 4, 2026
★
★
★
★
★
I have nothing but good things to say about Core 4x4. I have the crawler series on my JKU and we take it all over the place. These parts handle everything we throw at them.
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.
Specifications
| Color | Black, Blue, Charcoal, Green, Light Green, Orange, Purple, Red, White, Yellow |
| Lift Size | 0" — 6", 6"+ |
| Brand | CORE 4X4 |
| Series | Crawl Series |
| Tags | |
|---|---|
| Tags | |
