menu
cross
cross
chevron-left
chevron-right
chevron-right
SKU: RJ-301001-101

$169.00

-

RockJock Uni-Balls for Front Axle Housings are used in 3-link suspension applications, where the passenger’s side upper control arm has been eliminated and all of the suspension load is now being applied to the one axle housing mounting location. Our Uni-Balls press into the stock bushing holes on the casting side, driver’s side ONLY) of the front differential housing and provide a durable solution that incorporates a 5/8 in. thru-bolt hole for heavier hardware. This Uni-Ball will press into a stock JK or a stock TJ/LJ/XJ/MJ/ZJ housing, as well as aftermarket replacement differentials from companies such as Dana, UD-60s), Dynatrac, East Coast Gear, Fusion 4×4 and Currie Enterprises, cast center housings ONLY, does not apply to 9 in. / fabricated style differentials). Additionally, “most in. aftermarket differentials that are intended for installation in a JL/JT vehicle, still retain the bushing specs. of a JK bushing, making this the applicable Uni-Ball to install in an aftermarket differential, again, cast center only, not 9 in. style going into a JL/JT., for STOCK JL/JT housings, see our RJ-301002-101 Uni-Ball. The mounting width of the center pivoting assembly is 2 in., to allow it to fit into the fork on JL/JT/JK/TJ/LJ/XJ/MJ/XJ front upper control arm, however, the 5/8 in. thru-bolt hole will require drilling of the bolt hole in the control arm fork. Uni-Balls feature a sealed bearing assembly, so no greasing is required. Finish is clear zinc plating.

Series
Color OptionsCharcoal, Orange, Yellow, Blue, Green, Light Green, Red, Purple, Black, White
Built With
Grease Fittings
Lift Range
Fixed End
Thread Size
Thread Length
Make Model Year
0

FAQs

Our product lines are designed to offer the absolute most value for your budget. Not every build is the same and we understand that. Our series differ mostly in the components used in the construction of the parts. Our Cruise and Town Series utilizes our high grade flex poly bushings at both ends of the arm, this has proven to be a smooth riding easy to maintain and replace bushing that we absolutely love. Our Camp and Trail Series utilizes 5/16″ wall DOM tubing and incorporates a flexible Johnny Joint at the adjusting end, this series has been our most popular series for all around use, great for daily drivers that want to tear up the trails as well. Our Crawl, Tow, and Track Series utilizes the same 5/16″ wall DOM tubing, but features Johnny Joints at both ends. This series gives you the absolute most out of your suspension. This is great for heavy towing/hauling and extreme off-roading. Also, if the component is straight in these series we will machine these left and right hand threaded for easy adjustment on the vehicle!

We are constantly expanding our product lines to include complete kits, if you don’t see something on the site for your vehicle, reach out to our sales team and we can put something together for you.

Our two main sizes of jam nuts require an1-1/2″ wrench or an 1-5/8″ wrench. Generally speaking the 1-5/8″ jam nuts are used on our lower control arms and the 1-1/2″ jam nuts on our upper control arms and track bars. There are some exceptions, but we do offer a crow’s foot that has both sizes.

Any non-synthetic moly based grease is safe on our products, avoid lithium greases and anything red as this can prematurely deteriorate the internal components of the Johnny Joints and bushings used on our parts.

Related Products

Popular Categories

Product Suggestions

A promise from the owner

If you manage to break It,
we'll replace it.

As the founder of Core 4×4, I stand behind our unwavering commitment to delivering top-tier, American-made products that don’t break the bank. We take immense pride in our craftsmanship, sourcing materials domestically to ensure the highest quality possible. Our team goes the extra mile to rigorously test and refine every product, ensuring it not only meets but exceeds industry standards. When you choose us, you’re choosing durability, reliability, and affordability. That’s not just a business model— it’s a promise, from our family to yours.

Sincerely,
Spence Schramm
Founder, Core 4×4